Horizons ISG - ID-Mark Environmental Properties

ID-Mark Environmental Properties

ID-MARK aluminum sheets and polyester overlam films were subjected to the following controlled and industry accepted test conditions. Results for each test are as indicated. These results are typical values; not to be used for specification use.

CHEMICAL RESISTANCE	TEST CONDITIONS	RESULTS
	Four hour immersion at room temperature in:
	Water	No Effect
	Alcohol (Isopropyl)	No Effect (w/overlam) Slight Fading (w/o overlam)
	Oil	No Effect
	Hydrocarbons	No Effect
	Base (pH=10)	No Effect
	Acid (pH=4)	No Effect

ABRASION RESISTANCE	TEST CONDITIONS	RESULTS
	Taber abraser CS-17 wheels with 1000g load:
	With overlam	700 cycles
	Without overlam	73 cycles

SALT SPRAY	TEST CONDITIONS	RESULTS
SALT SPRAY	5% concentration at 95° F	No Effect (w/overlam)

EXTERIOR DURABILITY	TEST CONDITIONS	RESULTS
	Humidity 95% relative humidity at 90° F for 72 hours	No Effect
	Temperature -20° F + 250° F for 7 days	No Effect
	Long-Term Exposure 5-year exposure at 90 degree angle on aluminum plates. Weatherometer simulated conditions	Black: No Effect Red (w/overlam): No Effect Blue w/overlam): No Effect
	Shelf Life Plates should be stored in a clean, low humidity area. Temperature should be 80° F or less.	1 year

ID-MARK metal sheets meet the physical property requirements of MIL-P-15024D

© 2006 Horizons, Inc. Metalphoto^®, ID-MARK^®, AlumaJet^® & AlumaMark^® All Rights Reserved	Horizons Incorporated 18531 South Miles Road Cleveland, Ohio 44128 Sitemap